0102030405
OEM Aluminum Casting Al Zamak Zinc Alloy High Pressure Die Casting Auto Spare Product
Company
Inspection process
Tool Microscope:
1.Precision small customized parts testing, tolerance ±0.003mm.
2.Small and impractical workstations, parts not measured by CMM.
3.Measuring parts can be magnifed 10 times.
Precision Measurement Room:
1.Measuring equipment for precision machined parts, such as CMM, tool microscope, Nikon altimeter, etc.
2.Temperature:22-24 degrees Celsius, plus or minus 2 degrees Celsius.
3. Standard: All workpieces are placed in the measuring room before testing, inspectors are trained before taking up positions.
Caliper Measurement:
1.Measurement tolerance ± 0.02mm.
2. Measuring position, such as countersunk hole, screw hole, groove, step surface, etc.
3.Gloves should be worn when measuring.
Micrometer Measurement:
1.Measurement tolerance ± 0.001 mm.
2.Measuring position, such as outer diameter, length, width and steps of parts.
3.Gloves should be worn when measuring.
Hardness Tester Measurement:
1.Measure the hardness of the parts after heat treatment.
2.Measurement Range:20HRC-90HRC.
3.The measurement surface should be polished before measurement.
Laser Marker:
1. Marking of parts shipped.
2.Scope of marking materials: any material
3.Be careful not to scratch or touch parts when measuring.
FAQS
Q: How can I get the quotation?
A: Please give us your drawing, order quantity, weight and material of the product.
Q: How to enjoy OEM service?
A: Usually, according to your design drawings or original samples, we provide some technical suggestions and quotes to you, We will arrange production after you confirm.
Q: ls it possible to know how my productis going on without visiting your company?
A: We wvill offer a detailed production schedule and send weekly reports with digital pictures and videos which show the production progress.
Q: When can l get the sample and bulk order?
A: Sample time: 15-40 days after start to make mold, Order time: 20-40 days, the accurate time depends on product.
Q: What is your surface treatment?
A: Including: powder coating, sand blasting, painting, polishing, acid pickling, anodizing, enamel. zinc plating, hot-dip galvanizing, electrophoresis, chrome plating, etc.
packing
detail picture
